Disinfectants to help in our battle vs. the Coronavirus

SMT water1

Why you should Use SMT kits to help battle Coronavirus

Our SMT disinfection kits offer an easy-to-use, and easy-to-implement solution in stopping the spread of the virus.

Selectrocide 1G:
Our first product is a Selectrocide 1G kit, this includes one case (50 units) of Selectrocide 1G, one liter carboy, one vial of 0-500 ppm test strips and six individual spray bottles.
Each unit generates 2.5 gallons of EPA hospital disinfectant, for a kit total of 125 gallons. This can be used as a virucide against coronavirus on surfaces, and should be used to treat around 100-500 ft^2. To use, add one sachet to the carboy, fill with the appropriate volume of water, and allow at least 2 hours for generation. Once the generation is complete, use spigot to fill the bottles with solution. Use a test strip to confirm the solution’s concentration level is 100 ppm; spray on surfaces and ensure correct contact times.

Selectrocide 5G:
A second product SMT offers is a 5G kit, which includes one case (10 units) of Selectrocide 5G, one 15 gallon tank, one vial of 0-500 ppm test strips and twelve individual spray bottles.
Each unit generates 12.5 gallons of EPA hospital disinfectant, for a total kit total of 125 gallons. This can be used as a virucide against coronavirus on surfaces, and should be used to treat around 500-6000 ft^2 daily. To use, add one sachet to the tank, fill with the appropriate volume of water, and allow at least 2 hours for generation. Once the generation is complete, use spigot to fill the bottles with solution. Use a test strip to confirm the concentration level is 100 ppm; spray on surfaces and ensure correct contact times.

Selectrocide 12G:
The third product SMT offers is a 12G kit, which includes one case (8 units) of Selectrocide 12G, one 30 gallon drum, one vial of 0-500 ppm test strips, drum pump, and twelve individual spray bottles.
Each unit generates 30 gallons of EPA hospital disinfectant, for a total kit total of 240 gallons. This can be used as a virucide against coronavirus on surfaces, and should be used to treat over 6000 ft^2 daily. To use, add one sachet to the drum, fill the appropriate volume of water, and allow at least 2 hours for generation. Once the generation is complete, use the drum pump to fill the bottles with solution. Use a test strip to confirm the solution’s concentration level is 100 ppm; spray on surfaces and ensure correct contact times.

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Comment

Your email address will not be published. Required fields are marked *